LOGO LOGO
   Sākums    Forums    Jaunumi    Lejupielādes    Saites
Mitsubishi Outlander
 MeklētMeklēt

FS: 2.5 V6 6G73 DOHC 24V 125kw engine

 
Izveidot jaunu tēmu   Atbildēt uz tēmu   printer-friendly view    www.mitsubishiclub.lv Foruma Saturs -> Everything about everything
Apskatīt iepiekšējo tematu :: Apskatīt nākamo tematu  
Autors Ziņojums
ZeGaNe69 Nav norādīts
Viesis




AtbildētAtbilde saņemta: 27.03.2013 20:58    Tēma: FS: 2.5 V6 6G73 DOHC 24V 125kw engine Atbildēt uz tēmu Atbildēt citējot

For sale:

Engine from E88 Galant.
Engine type: 2.5 V6 6G73 DOHC 24valve 125kw (170PS)
Mileage 270 000km

Works fine, not smoking, not taking any oil.

In kit are:
Engine (complete engine assembly-block,cyl heads, timing belt side)
Intake manifold (throttle body not assembled)
Exhaust manifolds
Fuel injectors with fuel rails
A/C bracket
Power steering pump
Oil pan
Ignition coil packs with ignition wires
Spark plugs (iridium)
Engine harness
ECU

Engine should be looked over before assembling (some bolts are missing from intake manifold, timing belt cover is not complete etc)
Engine was replaced by 6G72 Dohc.

Pictures soon.

Price: make a reasonable offer.
Location: Tallinn Estonia
Contact: PM
Uz sākumu
Uz augšu
ZeGaNe69 Nav norādīts
Viesis




AtbildētAtbilde saņemta: 01.04.2013 19:14    Tēma: Atbildēt uz tēmu Atbildēt citējot

Will fit to:

90-96 Mitsubishi Sigma
3000GT

Engine is interchangeable, which mean: intake manifold can be re-positioned, so the engine can be fitted to co-driver`s side, cylinder heads are exactly the same- if someone is interested in bigger build. :)
Will still need V6 gearbox (2.0 V6`s does not fit)
Uz sākumu
Uz augšu
ZeGaNe69 Nav norādīts
Viesis




AtbildētAtbilde saņemta: 10.04.2013 20:37    Tēma: Atbildēt uz tēmu Atbildēt citējot

This engine is basically identical to 6G72 dohc.

Cylinder heads are same (except camshafts-lighter lift)
Engine block, connecting rods, main-cam bearings, crankshaft, manifolds- are same.

(wiki: with a smaller bore than the 3.0 liter version of the same block. Bore and stroke are 83.5 mm × 76 mm it is a 60-degree V6 and weighs around 155 kg.

Very good donor for some bi-turbo build or remanufacturing 3.0 litre engine.

:)
Uz sākumu
Uz augšu
Attēlot ziņojumus sākot ar pirmspēdējo:   
Izveidot jaunu tēmu   Atbildēt uz tēmu   printer-friendly view    www.mitsubishiclub.lv Foruma Saturs -> Everything about everything Visi laiki norādīti GMT + 2 stundas
Lapa 1 no 1

 
Pāriet uz:  
Jūs nevarat pievienot jaunus tematus šim forumam
Jūs nevarat atbildēt tematos šajā forumā
Jūs nevarat labot Jūsu ziņojumus forumā
Jūs nevarat dzēst Jūsu ziņojumus forumā
Jūs nevarat piedalīties aptaujā šajā forumā


Powered by phpBB © 2001, 2005 phpBB Group